1X2 Mini Snow Blower (Hardware Only)

$160.00

***This is included with the printed KITs already.

***Requires STL Files to print your own blower.

If you want to print your own snow blower you can buy these hardware kits to save on shipping costs.

Includes all the hardware you need to assemble your own 3d printed snow blower.

*Aluminum Scraper Bar (Now requires cutting drilling/counter sinking yourself with guide)

*Brass Tube requires cutting.

SKU: SB-HD-KIT Category: Tags: ,

Description

View the instruction manual here: 1X-2 Instruction Manual

FEATURES

  • Slipper clutch on both Augers and Impeller, protection from rock/ice damage.
  • Able to blow 15.25″ x 6″ of powdered snow.
  • Fits 775/540/550 sized motors (Or brushless equivalent sizes) (25mm or 29mm bolt patterns).
  • GT2 sized pulleys/belt for transmission (Very common 3D printer parts)
  • Steel/Brass Worm Gear transmission
  • 4.25″ Diameter Impeller.
  • 3.125″ Diameter Auger.
  • Select from 3, 4, 5, or 6 blade impeller.
  • Double bearing supported pulley drive.
  • Easy access to impeller and auger (6 screws to remove the entire assembly)
  • Thick plastic body design.
  • 1″ height gauge printed into the side panels
  • Direct replacement for old 1X Mini Blowers. (This fits onto all existing mounting KITs for TRX4, Blizzard, 1X KAT)
  • Chute can rotate 360 degrees to blow snow backwards!
  • PETG printed parts.
  • Aluminum scraper bar (Must be cut and drilled)
  • Skid shoe ride height adjustment.
  • 1X-2 weighs ~5lbs (old 1X was ~3.5lbs)
  • Several upgrades sold here.

INCLUDES

  • Metal Worm + Nylon Plastic Worm Gear Set (Updated recently, not shown in images)
  • Aluminum Pinion and Pulley Set / Belt (80T pulley + select motor pinion)
  • Hardware for slipper clutch assemblies
  • Stainless Steel Hardware (Screws / Bolts / Nuts / Washers)
  • Aluminum Scraper Bar (*Now requires cutting drilling/counter sinking yourself with guide)
  • Brass Tube (*Needs to be cut to length, for Auger)
  • Threaded Rod
  • Bearings

REQUIRES

  • Printing your own parts using our STL Files
  • Assembly / Putting everything together
  • Mounting system (For Kyosho Blizzard, or select “Blank Bracket” to design your own)
  • 6 channel radio or more
  • Electronics (Items below included with “Electronics Kit”)
    • Servo modified for continuous rotation (Info around the web for how to do this)
    • Powerful servo for lifting blower up and down (10kg+)
    • 775, 540 or 550 Sized brushed motor (Or brushless) (25mm or 29mm bolt patterns).
    • Speed controller

REQUIRED DRILL BITS

  • 5/64″
  • 3/32″
  • 1/8″
  • 9/64″





Additional information

Weight 1.5 lbs
Dimensions 13 × 3 × 3 in
Motor Pinion

16T 5mm (775 Motors), 16T 1/8", 20T 5mm (775 Motors) (Recommended), 20T 1/8"

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products