1/10th Scale Outboard Motor KIT V2.0

Description

Please contact [email protected] with any questions!

View the NEW UPDATED V2.0 1/10th Outboard Motor KIT instruction manual here

FEATURES

• NEW Now printed with ABS so you can fully customize colors (Email me after order for specific colors wanted)
  • ABS is MUCH more durable than resin
  • ABS can STILL be sanded, filled and painted (OPTIONAL)
• NEW the servo trim can now hold position under higher load motors (Old one used to flex)
  • This means no matter what motor your using now you can have working trim
  • Still the option to manually adjust trim without extra servo and channel
  • Outboard needs 2ch or 3ch.
• Measures ~7.75″ tall (With Racing Cover), 4″ Long, 2.25″ Wide
• Complete motor weighs around 10-14oz depending on motor setup
• Ultra scale look!
• 2 covers to pick from ‘Modern’ or ‘Racing’
  • Cover can be easily and quickly removed (magnets)
• Easy to paint (inlays etc.)
• Steering servo built into the motor
  • Easy to mount to any boats with flat transom areas in the back.
  • 2 screws needed to mount to a transom
  • 1 screw needed to connect the steering rod to anywhere on the boat
• Trim servo built into the motor
  • Scale look of being able to trim the motor up and down
  • NEW now works with outrunner brushless style motors (no more clamp on motor design)
• 3 cavitation plates included to try out different props, motors etc. so many variables!
  • Easy to make your own cavitation plate also
• Lower end uses standard hardware (all included)
  • Easy access, prop shaft drops out the bottom with a few screws
• Included propeller tray includes 20 props of different blade counts and pitch
  • Select ‘Reversed’ for one outboard if your running dual or triple motors
• Tested up to 3s 1450kv motor (As long as you set your gear mesh correctly! See manual)
  • I don’t recommend going faster, my outboard is meant for more scale speeds (still fast enough see my pontoon driving vids!)