2X KAT & 2X2 Blower – BASICS & ELECTRONICS

$3,575.00 – $3,875.00

This package includes the 2X Chassis + Basher Body + Brushed (150w) Electronics + Power Distribution PCB + 2X2 Snow Blower KIT + Lifting + Brushed (740w) Electronics + Tracks.

Requires assembly. (See description below)

This is a 3d printed tracked vehicle powered by dual motors. Powerful enough to use ride-on lawn mower attachments such as trailers, salt spreaders and more!

This is a 3d printed 2 stage RC Snow Blower that can blow snow up to 14″ deep and 28″ wide in a single pass! (Temperature & humidity effects performance)

Features a 9″ Impeller and slipper clutch protected Augers!

SKU: 2X2BASICCOMBO Categories: , Tags: , ,

Description

***2X KAT ORDERs CANNOT BE CANCELED ONCE PLACED they are made to order***

For current instruction manuals please see our Downloads page.

Included Products

Recommended Products

FEATURES

  • 2X Spyker KAT
  • Now includes a Trailer Hitch for free!
  • Measures 32″ x 25″ x 9″ with 4″ of ground clearance!
  • Able to pull ride-on lawn mower attachments such as trailers and salt spreaders!
  • All chain transmission provides smooth power and silent operation
  • Designed for AmpFlow powerful 36v electric motors
  • Space to hold 6x standard sized 12v 12ah SLA batteries (Anything can be used but recommend SLA for traction weight!)
  • Comes with 40 sealed rubber ball bearings for all the moving parts
  • Easy to adjust rear idler track tension
  • Modular top design can support unlimited amount of future expansion and top bodies
  • Able to mount and operate our 3D Printed Snow Blower
  • Very high strength parts now printed with PETG.
  • 2X2 Spyker Snow Blower
  • All new blower design which has a much larger 9″ impeller!
  • Each auger has a friction slipper clutch system to prevent damage
  • Large Delrin gear and Traxxas steel gearbox drives the auger
  • Sprocket and chain motor drive
  • Able to blow 28″ wide x 14″ high of snow. (Temperature & humidity effects performance)
  • Extra wide design meant for quick passes on medium amounts of snow
  • Comes with drift cutters allowing you to clear up to 20″ of snow on the edges of your driveway
  • Very high strength printed PETG parts.
  • Skid shoe ride height adjustment.

INCLUDES

  • All new chain-drive transmission!
  • Raw 3D Printed Parts (Plastic printed hull is also included, not shown in images) (If you buy the aluminum hull upgrade, no plastic hull will be included)
  • CNC aluminum transmission plate set
  • CNC aluminum mini side plate (Not shown, only included with plastic hull)
  • Stainless Steel Hardware (Screws / Bolts / Nuts / Washers)
  • Special driveshaft hardware
  • Chain and sprockets
  • Threaded rod auger shaft
  • Brass tubes used in the slipper clutch system
  • Aluminum scraper bar (requires drilling/countersinking)
  • CNC Delrin gear set
  • Traxxas diff gear set
  • Special driveshaft hardware
  • Chain and sprockets
  • Bearings
  • Printed Instruction Guides

REQUIRES

  • Batteries (See our instructions for more info)
  • Charger
  • Radio
  • Assembly / Putting everything together (Use the YouTube video below as your temporary instruction manual!)
  • Must drill out holes and clean up support material

REQUIRED DRILL BITS

  • 5/64″
  • 3/32″
  • 1/8″
  • 9/64″
  • 11/64″
  • 1/4″
  • 3/8″
  • 5mm







Additional information

Weight 60 lbs
Dimensions 24 × 24 × 12 in
Color A

Red, Blue, Orange, Green, Gold (Yellow), Black
Color B

Red, Blue, Orange, Green, Gold (Yellow), Black
Tracks

Narrow (General Purpose), Wide (Great For Snow)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Related Products