2X KAT & 2X2 Blower – COMPLETE

$4,175.00$4,730.00

This package includes the 2X Chassis + Hull ExtensionExtended Basher BodyElectronics Tray + Brushless (2800w) Electronics + High & Low Power PCB + 2X2 Snow Blower KIT + Brushless Electronics + Lifting Electronics360 Powered Chute + Aluminum Motor PlateCNC Impeller SetLED Light Bar + Tracks.

Requires assembly. (See description below)

This is a 3d printed tracked vehicle powered by dual motors. Powerful enough to use ride-on lawn mower attachments such as trailers, salt spreaders and more!

This is a 3d printed 2 stage RC Snow Blower that can blow snow up to 14″ deep and 28″ wide in a single pass! (Temperature & humidity effects performance)

Features a 9″ Impeller and slipper clutch protected Augers!

SKU: 2X2MEGACOMBO Categories: , Tags: , ,

Description

***2X KAT ORDERs CANNOT BE CANCELED ONCE PLACED they are made to order***

For current instruction manuals please see our Downloads page.

Included Products

Recommended Products

FEATURES

  • 2X Spyker KAT
  • Now includes a Trailer Hitch for free!
  • Measures 32″ x 25″ x 9″ with 4″ of ground clearance!
  • Able to pull ride-on lawn mower attachments such as trailers and salt spreaders!
  • All chain transmission provides smooth power and silent operation
  • Designed for AmpFlow powerful 36v electric motors
  • Space to hold 6x standard sized 12v 12ah SLA batteries (Anything can be used but recommend SLA for traction weight!)
  • Comes with 40 sealed rubber ball bearings for all the moving parts
  • Easy to adjust rear idler track tension
  • Modular top design can support unlimited amount of future expansion and top bodies
  • Able to mount and operate our 3D Printed Snow Blower
  • Very high strength parts now printed with PETG.
  • 2X2 Spyker Snow Blower
  • All new blower design which has a much larger 9″ impeller!
  • Each auger has a friction slipper clutch system to prevent damage
  • Large Delrin gear and Traxxas steel gearbox drives the auger
  • Sprocket and chain motor drive
  • Able to blow 28″ wide x 14″ high of snow. (Temperature & humidity effects performance)
  • Extra wide design meant for quick passes on medium amounts of snow
  • Comes with drift cutters allowing you to clear up to 20″ of snow on the edges of your driveway
  • Very high strength printed PETG parts.
  • Skid shoe ride height adjustment.

INCLUDES

  • All new chain-drive transmission!
  • Raw 3D Printed Parts (Plastic printed hull is also included, not shown in images) (If you buy the aluminum hull upgrade, no plastic hull will be included)
  • CNC aluminum transmission plate set
  • CNC aluminum mini side plate (Not shown, only included with plastic hull)
  • Stainless Steel Hardware (Screws / Bolts / Nuts / Washers)
  • Special driveshaft hardware
  • Chain and sprockets
  • Threaded rod auger shaft
  • Brass tubes used in the slipper clutch system
  • Aluminum scraper bar (requires drilling/countersinking)
  • CNC Delrin gear set
  • Traxxas diff gear set
  • Special driveshaft hardware
  • Chain and sprockets
  • Bearings
  • Printed Instruction Guides

REQUIRES

  • Batteries – Brushless motors requires HIGH POWER batteries to handle them. (See our instructions for more info)
  • Charger
  • Radio
  • Assembly / Putting everything together (Use the YouTube video below as your temporary instruction manual!)
  • Must drill out holes and clean up support material

REQUIRED DRILL BITS

  • 5/64″
  • 3/32″
  • 1/8″
  • 9/64″
  • 11/64″
  • 1/4″
  • 3/8″
  • 5mm







Additional information

Weight 80 lbs
Dimensions 24 × 24 × 12 in
Color A

Red, Blue, Orange, Green, Gold (Yellow), Black

Color B

Red, Blue, Orange, Green, Gold (Yellow), Black

Tracks

Narrow (General Purpose), Wide (Great For Snow)

Electronics

Brushless (2800w), Super Brushless (4000w)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…