USED Kyosho Blizzard + 1X-2 Snow Blower RTR

***This only works in light powdery fresh snow! Has a hard time in any wet conditions.

This is the used model used in my recent YouTube videos, everything still works great, blower only seen around 5 uses last winter.

View the instruction manual here: 1X-2 Instruction Manual

FEATURES

• Slipper clutch on both Augers and Impeller, protection from rock/ice damage.
• Able to blow 15.25″ x 6″ of powdered snow.
• Fits 775/540/550 sized motors (Or brushless equivalent sizes) (25mm or 29mm bolt patterns).
• GT2 sized pulleys/belt for transmission (Very common 3D printer parts)
• Steel/Brass Worm Gear transmission
• 4.25″ Diameter Impeller.
• 3.125″ Diameter Auger.
• Select from 3, 4, 5, or 6 blade impeller.
• Double bearing supported pulley drive.
• Easy access to impeller and auger (6 screws to remove the entire assembly)
• Thick plastic body design.
• 1″ height gauge printed into the side panels
• Direct replacement for old 1X Mini Blowers. (This fits onto all existing mounting KITs for TRX4, Blizzard, 1X KAT)
• Chute can rotate 360 degrees to blow snow backwards!
• PETG printed parts.
• Aluminum scraper bar (Must be cut and drilled)
• Skid shoe ride height adjustment.
• 1X-2 weighs ~5lbs (old 1X was ~3.5lbs)