2X KAT & 2X2 Blower – BASICS & ELECTRONICS
$3,575.00 – $3,875.00
This package includes the 2X Chassis + Basher Body + Brushed (150w) Electronics + Power Distribution PCB + 2X2 Snow Blower KIT + Lifting + Brushed (740w) Electronics + Tracks.
Requires assembly. (See description below)
This is a 3d printed tracked vehicle powered by dual motors. Powerful enough to use ride-on lawn mower attachments such as trailers, salt spreaders and more!
This is a 3d printed 2 stage RC Snow Blower that can blow snow up to 14″ deep and 28″ wide in a single pass! (Temperature & humidity effects performance)
Features a 9″ Impeller and slipper clutch protected Augers!
Description
***2X KAT ORDERs CANNOT BE CANCELED ONCE PLACED they are made to order***
For current instruction manuals please see our Downloads page.
Included Products
- 2X Spyker KAT Chassis
- 2X Spyker KAT Basher Body
- 2X Spyker KAT Brushed (150w) Electronics
- 2X Spyker KAT Power Distribution PCB
- 2X2 Spyker Snow Blower KIT
- 2X2 Spyker Snow Blower Brushed (740w) Electronics
- 2X Spyker KAT Lifting Electronics
Recommended Products
FEATURES
- 2X Spyker KAT
- Now includes a Trailer Hitch for free!
- Measures 32″ x 25″ x 9″ with 4″ of ground clearance!
- Able to pull ride-on lawn mower attachments such as trailers and salt spreaders!
- All chain transmission provides smooth power and silent operation
- Designed for AmpFlow powerful 36v electric motors
- Space to hold 6x standard sized 12v 12ah SLA batteries (Anything can be used but recommend SLA for traction weight!)
- Comes with 40 sealed rubber ball bearings for all the moving parts
- Easy to adjust rear idler track tension
- Modular top design can support unlimited amount of future expansion and top bodies
- Able to mount and operate our 3D Printed Snow Blower
- Very high strength parts now printed with PETG.
- 2X2 Spyker Snow Blower
- All new blower design which has a much larger 9″ impeller!
- Each auger has a friction slipper clutch system to prevent damage
- Large Delrin gear and Traxxas steel gearbox drives the auger
- Sprocket and chain motor drive
- Able to blow 28″ wide x 14″ high of snow. (Temperature & humidity effects performance)
- Extra wide design meant for quick passes on medium amounts of snow
- Comes with drift cutters allowing you to clear up to 20″ of snow on the edges of your driveway
- Very high strength printed PETG parts.
- Skid shoe ride height adjustment.
INCLUDES
- All new chain-drive transmission!
- Raw 3D Printed Parts (Plastic printed hull is also included, not shown in images) (If you buy the aluminum hull upgrade, no plastic hull will be included)
- CNC aluminum transmission plate set
- CNC aluminum mini side plate (Not shown, only included with plastic hull)
- Stainless Steel Hardware (Screws / Bolts / Nuts / Washers)
- Special driveshaft hardware
- Chain and sprockets
- Threaded rod auger shaft
- Brass tubes used in the slipper clutch system
- Aluminum scraper bar (requires drilling/countersinking)
- CNC Delrin gear set
- Traxxas diff gear set
- Special driveshaft hardware
- Chain and sprockets
- Bearings
- Printed Instruction Guides
REQUIRES
- Batteries (See our instructions for more info)
- Charger
- Radio
- Assembly / Putting everything together (Use the YouTube video below as your temporary instruction manual!)
- Must drill out holes and clean up support material
REQUIRED DRILL BITS
- 5/64″
- 3/32″
- 1/8″
- 9/64″
- 11/64″
- 1/4″
- 3/8″
- 5mm
Additional information
| Weight | 60 lbs |
|---|---|
| Dimensions | 24 × 24 × 12 in |
| Color A | Red, Blue, Orange, Green, Gold (Yellow), Black |
| Color B | Red, Blue, Orange, Green, Gold (Yellow), Black |
| Tracks | Narrow (General Purpose), Wide (Great For Snow) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.